834B and 836 Landfill Compactor Rollover Protective Structure (ROPS) - Inspect Caterpillar


Rollover Protective Structure (ROPS) - Inspect
`
834B and 836 Landfill Compactor [SEBU6696]
OPERATOR STATION
CAB GP
834B and 836 Landfill Compactor Rollover Protective Structure (ROPS) - Inspect



Illustration 1g00275513



    Illustration 2g00275504

  1. Remove the two bolts that hold the access covers on each side of the machine.



    Illustration 3g00275696

  1. Look for bolts that are loose, damaged, or missing. Replace the damaged bolts and any missing bolts with original equipment parts only.

    Note: Apply oil to all ROPS bolt threads before you install the bolt. Failure to apply oil can result in improper bolt torque.

  1. Tighten two bolts (1) to a torque of 900 ± 100 N·m (665 ± 75 lb ft). Tighten eight bolts (2) to a torque of 1300 ± 150 N·m (960 ± 110 lb ft).

    Repeat this procedure for the other sides of the ROPS.

  1. Drive the machine on a rough surface. If the ROPS mounting supports rattle, replace the ROPS mounting supports.

    Note: Do not repair the ROPS by welding reinforcement plates to the ROPS. Consult your AVSpare dealer for repair of cracks in any welds, in any castings, or in any metal section of the ROPS.

  1. Install the access covers.

Information System: