NOTICE |
---|
If power box clutch slippage occurs (output shafts stop or slow considerably), release and engage the control intermittently, or lighten load on the blade. |
Pull right blade lift lever back to raise right side of blade.
(Release control before lift arm contacts frame.)
Push right blade lift lever forward to lower right side of blade.
Pull left blade lift lever back to raise left side of blade.
(Release control before lift arm contacts frame.)
Push left blade lift lever forward to lower left side of blade.
Pull circle reverse lever back to turn blade clockwise.
Push circle reverse lever forward to turn blade counterclockwise.
Pull circle side shift lever back to move center shift rack to right.
(At least 2 teeth must remain visible at left of rack.)
Push circle side shift lever forward to move center shift rack to left.
(At least 2 teeth must remain visible at right of rack.)
Pull blade side shift lever back to shift blade to right.
Push blade side shift lever forward to shift blade to left.
Push blade tip lever forward to tip blade forward.
Pull blade tip lever back to tip blade back.
Pull wheel lean lever back to lean wheels to right.
Push wheel lean lever forward to lean wheels to left.
Pull implement lever back to raise implement.
Push implement lever forward to lower implement.
On machines equipped with lift arm limit controls, the lift limit reset warning light will go on when a lift limit switch has been actuated. Move the arm away from the frame by operating the lift control lever in the opposite direction while pushing the reset button.