CB34, CB34XW and CC34 Utility Compactors Plate Locations and Film Locations Caterpillar


Plate Locations and Film Locations
`
1.1. Product Identification Number (PIN)
2.1. Eurasian Economic Union
3.2. Manufacturer Information
4.1. Certification
5.2. ROPS/FOPS Structure
6.2. European Union
7.2. Sound Certification

The Product Information Number (PIN) will be used to identify a powered machine that is designed for an operator to ride.

AVSpare products such as engines, transmissions and major attachments that are not designed for an operator to ride are identified by Serial Numbers.

For quick reference, record the identification numbers in the spaces that are provided below the illustration.

Product Identification Number (PIN)



Illustration 1g01415032

Machine PIN____________________



Illustration 2g01415033

Engine Information and Serial Number Plate____________________

Eurasian Economic Union

For machines compliant to the Eurasian Economic Union requirements, the EAC mark plate is positioned near the Product Identification Number (PIN) plate (see Product Information Section of the machine Operation and Maintenance Manual). The EAC mark plate is placed on machines certified to the Eurasian Economic Union requirements effective at the time of market entry.



Illustration 3g06094564

The Month and Year of Manufacture are on the PIN plate.

Manufacturer Information

Manufacturer:

AVSpare Paving Products Inc.,
9401 85 th Avenue North
Brooklyn park MN, 55445-2199

Entity authorized to communicate on request as required by Customs Union Technical Regulations of the Eurasian Economic Union:

AVSpare Eurasia LLC
75, Sadovnicheskaya Emb.
Moscow 115035, Russia

Certification

ROPS/FOPS Structure

This message is positioned on the ROPS on the left side of the machine above the door.



Illustration 4g01212098

------ WARNING! ------

Structural damage, an overturn, modification, alteration, or improper repair can impair this structure's protection capability thereby voiding this certification. Do not weld on or drill holes in the structure. This will void the certification. Consult your Cat dealer to determine this structure's limitations without voiding its certification.


This machine has been certified to the standards that are listed on the certification film. The maximum mass of the machine, which includes the operator and the attachments without a payload, should not exceed the mass on the certification film.

Refer to Operation and Maintenance Manual, "Guards (Operator Protection)" for more information.

European Union



Illustration 5g01880193

This plate is positioned on the bottom left side of the plate for the PIN.

Note: The CE plate is on machines that are certified to the European Union requirements that were effective at that time.

For machines compliant to 2006/42/EC, the following information is stamped onto the CE plate. For quick reference, record this information in the spaces that are provided below.

  • Engine Power Primary Engine (kW)____________________

  • Engine Power for Additional Engine (If Equipped) ____________________

  • Typical Machine Operating Weight for European Market (kg)____________________

  • Year of Construction____________________

  • Machine Type ____________________


Illustration 6g01120192

This plate is positioned on the bottom left side of the plate for the PIN.

Note: The CE plate is on machines that are certified to the European Union requirements that were effective at that time.

For machines compliant to 1998/42/EC, the following information is stamped onto the CE plate. For quick reference, record this information in the spaces that are provided below.

  • Engine Power Primary Engine (kW)____________________

  • Typical Machine Operating Weight for European Market (kg)____________________

  • Year____________________

For the name and address of the manufacturer, and the country of origin of the machine, refer to the PIN plate.

For manufacturer name and address and the country of origin, see the PIN plate.

Sound Certification



Illustration 7g00933634
A typical example of this film is shown. Your machine may have a different value.

If equipped, the certification film is used to verify the environmental sound certification of the machine. The value that is listed on the film indicates the guaranteed sound power level. The guaranteed sound power level is measured at the time of manufacture. The guaranteed sound power level is measured according to the conditions that are specified in "ISO 6394:1998".

Information System:

CB34, CB34XW and CC34 Utility Compactors Capacities (Refill)
CB34, CB34XW and CC34 Utility Compactors Sound Information and Vibration Information
CB22, CB24, CB32 and CC24 Utility Compactors Capacities (Refill)
140M and 150 Motor Grader Blade Lift Cylinder - Remove and Install
140M and 150 Motor Grader Wheel Lean Bar - Remove and Install
AccuGrade GPS (CD700) Design Surface Type
AccuGrade GPS (CD700) Plan View
AccuGrade GPS (CD700) Sloping Surface Design
AccuGrade GPS (CD700) Cross Section View
AccuGrade GPS (CD700) Text View
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Relief Valve (Main, Vibratory) - Test and Adjust
VIMS Communicator Communicator Flash Utility Software
CB34, CB34XW and CC34 Utility Compactors Fuel System Water Separator Element - Replace
C32 Engine for D11T Track-Type Tractors Coolant Temperature Is High
Installation of the Power Shift Solenoid{5264, 5479}
140M and 150 Motor Grader Window Wiper and Wiper Motor (Door) - Remove and Install - Side
CP54 and CS54 Vibratory Soil Compactors Machine Systems System Pressure - Release
C32 Engine for D11T Track-Type Tractors Fuel Filter Is Restricted
C32 Engine for D11T Track-Type Tractors Fuel Temperature Is High
C27 and C32 Engines for Caterpillar Built Machines Exhaust Temperature Is High
C32 Engine for D11T Track-Type Tractors Inlet Air Temperature Is High
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Vibratory Frequency - Test and Adjust - Fixed
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Magnetic Sensor (Vibratory) - Test and Adjust
CP54 and CS54 Vibratory Soil Compactors Machine Systems Hydraulic Oil Contamination - Test