AccuGrade GPS (CD700) Text View Caterpillar


Text View
`

The text items that are displayed in "Text View 1" and "Text View 2" are configurable. In order to see "Text View 1", press the next key from the profile view. In order to see "Text View 2", press the next key from "Text View 1". Illustration 1 shows an example of "Text View 1" configured in order to show guidance information.




Illustration 1g01296590

Illustration 1 shows :

  • The "Fill Left" value means that, at the left blade tip, 0.1 ft. needs to be filled in order to reach the working surface.

  • The "Fill Left" field is colored green in order to indicate that the left blade tip is within tolerance for being on-grade.

  • The "Fill Right" value means that, at the right blade tip, 0.1 ft. needs to be filled from the current elevation to reach the working surface.

  • The "Fill Right" field is colored green to indicate that the right blade tip is on-grade. The machine is not within the on-grade tolerance.

  • The "Design Elev" (-0.2 ft.) is the final target level at the right blade tip (the tip that has focus).

  • The "Speed", 0.0 mph, indicates that the scraper is not moving.

Illustration 2 shows "Text View 2" configured to show position information.




Illustration 2g01296591

Illustration 2 shows:

  • Northing, easting, and elevation positions at the guidance point that has focus (right tip).

  • The heading of the machine in degrees

In order to see the offset from a selected alignment, set a "Text View" to show the "Offline" item.

Information System: