CB22, CB24, CB32 and CC24 Utility Compactors Specifications Caterpillar


Specifications
`
1.1. Intended Use
2.1. Dimensions

Intended Use

This roller is a self-propelled vibratory compactor. This roller consists of one or more metallic cylindrical bodies (drums) that are used for compaction. This roller may also consist of rubber tires that are used for compaction. This roller is used to compact materials such as crushed rock, earth, asphalt or gravel through rolling and/or vibrating action of the roller.

Dimensions

Table 1
CB22
Vibratory Compactor 
Operating Machine Weight  2500 kg (5512 lb) 
Maximum Length of Machine  2500 mm (8 ft 2 inch) 
Width of the Machine  1098 mm (3 ft 7 inch) 
Height of the Machine with a ROPS  2700 mm (8 ft 10 inch) 
Width of Drum  1000 mm (3 ft 3 inch) 

Table 2
CB24
Vibratory Compactor 
Operating Machine Weight  2700 kg (5952 lb) 
Maximum Length of Machine  2500 mm (8 ft 2 inch) 
Width of the Machine  1298 mm (4 ft 3 inch) 
Height of the Machine with a ROPS  2700 mm (8 ft 10 inch) 
Width of Drum  1200 mm (4 ft 11 inch) 

Table 3
CB24 XT
Vibratory Compactor 
Operating Machine Weight  3210 kg (7077 lb) 
Maximum Length of Machine  2500 mm (8 ft 2 inch) 
Width of the Machine  1298 mm (4 ft 3 inch) 
Height of the Machine with a ROPS  2700 mm (8 ft 10 inch) 
Width of Drum  1200 mm (4 ft 11 inch) 

Table 4
CB32
Vibratory Compactor 
Operating Machine Weight  3230 kg (7121 lb) 
Maximum Length of Machine  2500 mm (8 ft 2 inch) 
Width of the Machine  1398 mm (4 ft 7 inch) 
Height of the Machine with a ROPS  2700 mm (8 ft 10 inch) 
Width of Drum  1300 mm (4 ft 3 inch) 

Table 5
CC24
Vibratory Compactor 
Operating Machine Weight  2390 kg (5269 lb) 
Maximum Length of Machine  2500 mm (8 ft 2 inch) 
Width of the Machine  1298 mm (4 ft 3 inch) 
Height of the Machine with a ROPS  2700 mm (8 ft 10 inch) 
Width of Drum  1200 mm (4 ft 11 inch) 

Note: The following items are included in the operating machine weight: lubricants, coolant, half full fuel tank, full hydraulic tank, half full water tank and an 80 kg (176 lb) operator.

Information System:

CB22, CB24, CB32 and CC24 Utility Compactors Sound Information and Vibration Information
CB22, CB24, CB32 and CC24 Utility Compactors Safety Messages
140M and 150 Motor Grader Control Manifold (Steering Backup) - Install
140M and 150 Motor Grader Control Manifold (Steering Backup) - Remove
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors Propel System Piston Pump Neutral (Drum Propel Pump) - Adjust
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors Propel System Pressure Override Valve (Axle Propel Pump) - Test and Adjust
140M and 150 Motor Grader Steering Control Valve - Install
140M and 150 Motor Graders Engine Supplement Radiator Guard and Support, Aftercooler, Hydraulic Oil Cooler, and Radiator, - Install
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors Propel System Pressure Override Valve (Drum Propel Pump) - Test and Adjust
R1600G Load Haul Dump Machine Electrical System Actual Gear Indicator
R1600G Load Haul Dump Machine Electrical System Engine Stop
R1600G Load Haul Dump Machine Electrical System Engine Start
CB22, CB24, CB32 and CC24 Utility Compactors Plate Locations and Film Locations
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant Compressor
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors Propel System Piston Pump Neutral (Axle Propel Pump) - Adjust
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors Propel System Pump Control (Manual Displacement Control) Neutral (Drum Propel) - Test and Adjust
2007/10/01 A New Transmission Speed Sensor is Now Available for Series H-Series Motor Graders {3175}
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors Propel System Pump Control (Manual Displacement Control) Neutral (Axle Propel) - Test and Adjust
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors Propel System Neutral Start Switch - Test and Adjust
Replacement of the Blower Assembly on Certain Wheel Loaders{7304, 7320}
2007/10/08 A New Main Power Relay, Starter Relay and Glow Plug Relay are Now Used {1403, 1412, 4493, 7499}
2007/10/08 A New Main Power Relay and Starter Relay are Now Used {4493, 7499}
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Piston Ring Groove - Inspect
The Electronic Priming Pump for Machine Engines will not Prime{1258, 1263}