Lower or block all equipment before working on or around machine.
Block blade before changing cutting edge of end bits.
Use caution when removing radiator cap, drain plugs, grease fittings or pressure taps.
Read Lubrication and Maintenance Guide before starting to make adjustments or repairs.
Do not attempt adjustments while motor grader is moving or the engine is running.
Use the proper tools. Replace or repair broken or damaged tools and equipment.
Wear protective clothing, safety glasses, respirator or other safety items when required.
Do not permit smoking or open fires around fuels or other flammables.
 |
When using pressure air wear safety glasses and protective clothing. Maximum air pressure must be below 30 PSI (2 kg/cm2). |
 |
Operate engine only in well ventilated area.
Store oily rags or other combustible material in a safe place.
Promote good housekeeping. Keep tools and work area clean.
Do not allow unauthorized personnel on motor grader when it is being serviced.
Do not attempt repairs you do not understand.
|
To avoid possible weakening of the ROPS (Rollover Protection Structure), consult a AVSpare dealer before altering the ROPS in any way. The protection offered by the ROPS will be impaired if it has been subjected to structural damage or has been involved in an overturn incident. |
|
Attach tag to controls while motor grader is being serviced.
Turn disconnect switch OFF and remove key before servicing electrical system.
Read warning and caution information provided on the motor grader. Follow servicing instructions carefully.